Absorption Coefficient Octave Band Conversions

Post and discuss acoustic topics, Studio design, construction, and soundproofing here

Absorption Coefficient Octave Band Conversions

Postby fredley_banyon » Tue Jul 16, 2013 1:05 pm

Hello All,

I recently ran into a dilemma while doing some comparative research between companies that offer competing acoustic plaster. In the comparison I was able to find the absorption coefficients based on octave and 1/3 octave bands. The problem that I have come across is that two of the companies offer octave band analysis for their absorption coefficients and the other offers 1/3 octave band information.

I would like to have all of the data in a consistent band analysis (preferably 1/3 octave band) for our comparison and I am having trouble converting between octave and 1/3 octave bands for the absorption coefficients.

Are the values for the 1/3 octave bands just averaged arithmetically or logarithmically to find each octave band? If not, then is anyone aware of how to accurately convert these values from octave to 1/3 octave bands and visa versa?

Thank you for you help.

Posts: 1
Joined: Mon Jul 15, 2013 7:25 pm

Re: Absorption Coefficient Octave Band Conversions

Postby Scott R. Foster » Thu Jul 18, 2013 6:20 am

There is a convention for 1/3rd octave bands

http://www.engineeringtoolbox.com/octav ... _1602.html

maybe just eyeball the curve fitting using the conventions frequency points
Scott R. Foster
Posts: 3854
Joined: Mon Feb 02, 2004 12:41 pm
Location: Jacksonville, FL USA

Return to Discussion

Who is online

Users browsing this forum: No registered users and 2 guests