ITU ?

[Ido]

heya Bob or any other kind & resourcefull being, any chance you can post that link? with the speaker- rt60 recommendations etc.?
I had it and misplaced it.
thanks,
Ido

[Bob]

I don't use this table any more:
 http://forum.studiotips.com/viewtopic.php?p=2869#2869

I just type the room dimensions into
 http://www.bobgolds.com/Mode/RoomModes.htm
and it calculates ITU's near the bottom right.

There's a PDF somewhere, with a section about japanise recording studios, that has a graph a lot like this in it
http://www.bobgolds.com/ITU%20RT%2060.bmp
ah, here's the pdf I was thinking of
http://www.aes.org/technical/documents/AESTD1001.pdf

This was posted by avare: http://forum.studiotips.com/viewtopic.php?p=18807#18807
which has these two good links to the same graph
http://www.ebu.ch/CMSimages/en/tec_doc_ ... -10536.pdf
http://www.tonmeister.de/foren/surround ... 02_v2a.PDF

http://www.grammy.com/PDFs/Recording_Ac ... _1_Rec.pdf
from: http://www.grammy.com/Recording_Academy ... uidelines/

Some more RT60 text
http://forum.studiotips.com/viewtopic.php?p=18784#18784

[Ido]

that's great Bob, thanks a lot.
I was looking for speaker-listener placement, which is to be had in those links in bundles.
I do think though that I'm missing a direct ITU link, which maybe you once posted? I may be wrong and what I'm thinking of might in fact be in one of the above.
Ido

[Bob]

( Rec  ITU-R BS.1116-1 ) ?
http://www.itu.int/rec/R-REC-BS.1116-1-199710-I/en

http://www.broadcastpapers.com/IBC2003p ... -print.htm

[Ido]

thank you Bob!